Skip to content

PC based tester user interface software written in C#.net using Microsoft Visual Studio

1430110094-screencap1.jpg-original

This software performs the following functions:
1) Logs on the test operator (or supervisor) so the operator can be identified in the test results.
2) Accepts the scanned (or typed) serial number of the DUT to include with the results.
3) Instructs the user, step by step, in English and a local language (e.g. Chinese) and with graphic prompts.
4) Checks the DUT for previous test results and references these if found.
5) Programs the DUT with test firmware via the tester’s STM32 discovery board programmer and the STLINK Utility.
6) Automatically performs all tests (approx 50 tests) on each DUT and displays the progress and/or results.
7) Logs all detailed test results in text files for later confirmation / record keeping.
8) Programs each DUT’s results into its on board microcontroller EEPROM memory.
9) Allows a DUT’s detailed test results to be printed out, e.g. to go with failed DUTs for repair.
10) Provides supervisor settings for testing configuration, user names & passwords and com port settings.
11) Performs a self calibration procedure against a known good sample.

ADDRESS

31 Kaska Road, Hamurana
RD7 Rotorua, 3097

CALL US

021 034 2608

OPENING HOURS

Monday-Friday 9:00 AM - 5:00 PM